Sony DPF-X95 Digital Photo Frame User Manual


 
9
GB
Basic operations
Basic operations
Preparing the remote
control
The supplied lithium battery (CR2025) has
already been inserted into the remote control.
Pull out the protective sheet before use as
shown in the figure.
Using the remote control
Point the top end of the remote control towards
the remote sensor on the photo frame.
Note
The photo frame may fall if you use the buttons on the
photo frame when it is hanging on the wall. Operate
the photo frame using the remote control.
Replacing the battery of the
remote control
If the remote control stops working, replace the
battery (CR2025 lithium battery) with a new
one.
1 Press the tab in.
2 Pull the battery holder out.
3 Insert a new battery and slide the
battery holder back into the remote
control.
Insert the battery so that “+” is facing
upwards.
Notes
Using a battery other than the specified one may
result in the battery rupturing.
Dispose of used batteries as specified by the local
authorities.
Do not leave the remote control in a very hot and
humid place.
Take care that no foreign objects get inside the
remote control when you, for example, replace the
battery.
Protective sheet
Remote
sensor
Continued