Filter
Top Products
45-GB
Using image data with other equipment
Using the house
current (mains)
1 Open the battery cover.
2 Insert the one end of the DK-115
DC connecting cable to the battery
terminal, and close the cover.
When inserting the cable, open the
slot cover for AC power adaptor/
charger and be careful not to pinch
the cable.
3 Connect the other end of the DC
connecting cable to the AC power
adaptor/charger.
4
Connect the power cord (mains
lead) to the AC power adaptor/
charger, and to a wall outlet (mains).
Power cord (mains
lead) (supplied)
AC power adaptor/
charger AC-VF10
(supplied)
DK-115 DC
connecting cable
(supplied)
z
Using image data with
other equipment
to A/V OUT
A/V connecting
cable (supplied)
Watching images on a
TV screen
Connect the camera to the TV that has
a video input jack. You can enjoy a
“SLIDE SHOW“ on the TV screen.
When shooting an image in macro, you
can adjust the focus more easily on the
TV screen.
1 Connect the A/V OUT jack of the
camera to the video input jack of
the TV.
2 Start playback on the camera.
Playback picture appears on the
TV screen.
PNotes
•Before making connections, turn off
each equipment. After connections are
completed, turn on each equipment.
• When you use the camera with
connecting other equipment for a long
time, use the AC power adaptor/charger.
•You cannot use a TV that has an
antenna (aerial) connector only.
•When the MODE selector is set to
MOVIE or STILL and the lens is rotated
to the same side as the LCD screen (face
to face shooting), the mirror image
appears upside-down on the TV screen.
•Beep does not sound when connecting
with the A/V connecting cable. The
image does not appear on the LCD
screen.
Slot cover for AC
power adaptor/charger
Set the TV/video
input selector to
the video position