Filter
Top Products
26
Basic Operations
Shooting images easily (Auto Adjustment
mode)
The procedure for shooting images using the basic functions is given below.
1 Open the lens cover.
2 Hold the camera steady, keeping your arm at your side.
Touch panel
Shutter button
Zoom (W/T) lever
Position the subject in
the center of the focus
frame or touch the point
for focusing.
z You can touch the screen to select the point to bring into focus.
Touching the subject on the touch panel displays a frame, and
then pressing the shutter button halfway down brings the frame
into focus. If there is a face in the frame, in addition to the focus,
the brightness and hue are also automatically optimized.
• is displayed if a face is detected in the touched position or
is displayed if an object other than a person’s face is
detected.
• You cannot use this function when using the digital zoom and
Close focus mode.
• You can also use this function in (Soft Snap) mode.
• If you touch outside the selectable focus range, the selectable range is displayed.