Filter
Top Products
Cyber-shot User Guide
Print
Operation Search
Before Use
Shooting
Viewing
Using 3D Functions
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Shooting > Using shooting functions > Burst/Bracket
Burst/Bracket
You can select Single (single-image), Burst or Bracket as the shooting mode.
1. Press
(Burst Settings) on the control wheel.
2. Select the desired mode with the control wheel.
(Single)
The camera shoots a single image.
(Burst)
The camera shoots 10 continuous frames in one burst when you hold down
the shutter button.
(Bracket)
The camera shoots a series of 3 images each with a different setting.
Notes
[Flash] is set to [Off].
When recording with the self-timer, a series of 10 images is recorded if [Burst] is selected
and a series of 3 images, each with different settings, is recorded if [Bracket] is selected.
When [Burst] is selected, [Focus], [White Balance], and [EV ] are adjusted for the first
image, and these settings are also used for the other images.
When the battery level is low, or when the internal memory or a memory card is full, the
burst stops.
[VGA] image size will be set while recording on internal memory.
You may not be able to set some functions or MENU items depending on the selected REC
mode. For details, see “Functions not available in some REC modes” [Details] and “MENU
items not available in some REC modes.” [Details]
Related Topic
Burst Shooting Interval
Bracket Setting
Back to top
Copyright 2011 Sony Corporation
78