Filter
Top Products
Help Guide | Identifying parts
http://www.sony-asia.com/microsite/cybershot_userguides/DSC-RX10/eng/contents/TP0000236260.html[24/11/2013 15:55:50]
3. (N mark)
This mark indicates the touch point for connecting this product and an NFC-enabled
smartphone.
NFC (Near Field Communication) is an international standard of the short-range wireless
communication technology.
4. Battery eject lever
5. Battery insertion slot
6. Connection plate cover
Use this when using an AC-PW20 AC Adaptor (sold separately). Insert the connection plate
into the battery compartment, and then pass the cord through the connection plate cover
as shown below.
Make sure that the cord is not pinched when you close the cover.
7. Battery cover
8. Tripod socket hole
Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot
firmly secure this product, and damage to the product may occur.
Notes on use
4-477-079-12(1)
Copyright 2013 Sony Corporation