Filter
Top Products
Page 4 of 9
learning resources © University of Lincoln 2002
Media Equipment: DSR 200
Installing and removing the battery
To install the battery
An arrow situated on the battery indicates which way to
place it
Slide the battery down until it clicks into place.
To remove the battery
Press the BATT button, lift the battery pack out in the
direction of the arrow.
Connecting the mains supply that accompanies the equipment can operate the camera.
To do this, connect the mains supply to the charger. The DC lead has two different
connectors, one attaches to the charger (see diagram 4) and the other to the camera. To
attach the DC lead to the camera open the rubber flap at the side of the camera and insert
the plug into the DC IN socket.
Inserting and ejecting a cassette