Filter
Top Products
61
Using the Menu
You can set an offset value to adjust the
automatic exposure adjustment value
between [-7] (dark) and [+7] (bright) with
the SEL/PUSH EXEC dial. The default
setting is [0]. and selected value
appears on the screen when you change the
value from the default setting.
b Notes
• This function is not effective while you adjust
the iris, shutter speed and gain all manually.
• [AE SHIFT] is canceled when [EXPOSURE] is
manually adjusted.
• This function is not effective when [HYPER
GAIN] is set to [ON].
You can select the speed at which the
automatic exposure adjustment function
follows changes in the brightness of the
subject. You can select a speed from
[FAST], [MIDDLE] and [SLOW]. The
default setting is [FAST].
You can select the highest iris value for
automatic adjustment from [F11], [F9.6],
[F8], [F6.8], [F5.6], [F4.8] and [F4]. The
default setting is [F11].
b Notes
• This function is not effective during manual iris
adjustment.
BON
Reduces flickering. Flickering of the
screen under a light source such as a
fluorescent lamp will be reduced.
OFF
Does not reduce flickering.
b Notes
• Flickering may not be reduced for certain light
sources.
When you set this function to [ON], your
camcorder detects high contrast images,
such as backlit scenes, and automatically
improves underexposed images. The
default setting is [OFF].
b Notes
• When you set [BACK LIGHT] to [ON],
[CNTRST ENHCR] is temporarily disabled.
When you set this function to [ON] (.),
you can correct backlighting. The default
setting is [OFF].
b Notes
• [BACK LIGHT] is set to [OFF] when you set
[SPOTLIGHT] to [ON].
• [BACK LIGHT] is set to [OFF] when
[EXPOSURE] is manually adjusted.
• [BACK LIGHT] is set to [OFF] if at least two of
iris, gain, and shutter speed are adjusted
manually.
• [BACK LIGHT] is set to [OFF] when [HYPER
GAIN] is set to [ON].
When you set this function to [ON] ( ),
you can prevent overexposure of light
during recording of a subject under strong
light, such as a stage. For example, you can
prevent people’s faces from being over-
exposed. The default setting is [OFF].
b Notes
• [SPOTLIGHT] is set to [OFF] when you set
[BACK LIGHT] to [
ON].
• [SPOTLIGHT] is set to [OFF] when
[EXPOSURE] is manually adjusted.
• You cannot use the spotlight function if at least
two of iris, gain, and shutter speed are adjusted
manually.
AE SHIFT
AE RESPONSE
AT IRIS LMT
FLCKR REDUCE
CNTRST ENHCR
BACK LIGHT
SPOTLIGHT
Continued ,