Filter
Top Products
5. CAMERA CONNECTORS
5. CAMERA CONNECTORS
12
–
DXC-C33/C33P Product Information Manual
Front Panel
CAMERA
FREEZE
BARS
MENU
WHITE
BLACK
ENTER
AE AREA
SELECT
LOCK
AE LEVEL
RED GAIN BLUE
GAIN
24dB
CAMERA CONTROL UNIT
0dB
SCENE FILE
SELECT
•FREEZE button and indicator
Pressing this button stores an image
in the built-in frame memory and outputs
it as a freeze picture. When the freeze picture
mode is activated, the indicator lights.
•(Power) switch and indicator
The indicator lights up in green when
the power is on.
Note: the CHU must be
connected to the
CCU by the camera
cable before switching
on or off.
•LEFT/FILE SELECT button
While the menu is displayed;
Decreases the setting value or changes the setting.
Also used for an AE window setting, etc.
While the normal screen is displayed;
Switches the user preset file between A and B
•UP/BLACK (black balance)
button
While the menu is displayed;
Moves the menu cursor upward.
Also used for an AE window
setting, etc.
While the normal screen is
displayed;
Activates the automatic black
balance adjustment.
•MENU button
Displays/hides the menu on the monitor
screen.
When a setting menu is displayed, press
this button to return to the MAIN menu.
•ENTER button
Selects a setting menu. Also used for
an AE window setting, etc.
•AE AREA SELECT button
Selects the AE window set in
the menu. Each press of the
button selects the AE AREA 1
or the AE AREA 2.
Note: The button functions
only when
GAIN is set to AGC or
SHUTTER is set to
CCD-IRIS.
•CAMERA connector (20-pin)
Connects to the CHU via the
CCMC-20P05/10/30 camera cable.
•BARS (color bars output)
button
Displays/hides color bars.
•DOWN button
Moves the menu cursor
downward.
Also used for an AE window
setting, etc.
•GAIN control
Adjusts the gain
level in the range
from 0 to 24 dB.
•GAIN RED/BLUE controls
Controls fine adjustment of white
balance when AWB or ATW mode
is selected. Also controls the red
and blue gain when adjusting the
white balance manually.
•RIGHT/WHITE (white
balance) button
While the menu is displayed;
Increases the setting value or
changes the setting. Also
used for an AE window
setting, etc.
While the normal screen is
displayed;
Activates the automatic white
balance adjustment when
MODE is set to AWB in the
WHITE BALANCE menu.
•LOCK button and
indicator
Locks all buttons and knobs
on the CCU except for power
switch (The indicator lights).
Note: The lock mode retains
after the unit is
switched off.
•AE LEVEL control
Adjusts the auto exposure
convergence level, when the
camera is set to AGC or CCD-
IRIS mode.
Luminance level is precisely
adjusted in KNOB mode.
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 12