Filter
Top Products
19
Basic Functions
ALARM Setting Command List
ALARM Inquiry Command List
Command Set Command Command Packet Comments
CAM _ Alarm On 8x 01 04 6B 02 FF Alarm start
Off 8x 01 04 6B 03 FF Alarm stop
Set Mode 8x 01 04 6C pp FF Mode Setting
*Select one from 13 modes
Set Day Night Level 8x 01 04 6D 0p 0p 0p ppp: Day distinction AE level
0q 0q 0q FF qqq: Night distinction AE level.
90 07 04 6B 01 FF High signal output
(Low t High edge)
90 07 04 6B 00 FF Low signal output
(High t Low edge)
VISCA Mode Code (pp) Details of Mode
00 Set the internal focus position. When focus movement is detected, the detect signal is High. When focus goes
back to the previous position, the detect signal is Low.
01 Set a fixed period of time. When focus does not move during the time, the focus position is memorized as a
rest position and the detect signal is Low.
When focus moves, the detect signal is High. Afterwards when focus does not move for the fixed period of
time, the focus position is memorized and the detect signal becomes Low.
02 Set the internal AE Level. When AE movement is detected, the detect signal is High. When AE Level goes
back to the previous level, the detect signal is Low.
03 Set a fixed period of time. When AE Level does not change during this time, the AE value is memorized as a
rest value and the detect signal is Low.
When AE value changes, the detect signal is High.
Afterwards when AE value does not change for the fixed period of time, the AE value is memorized and the
detect signal becomes Low.
04 mode “00” and mode “02”
05 mode “00” and mode “03”
06 mode “01” and mode “02”
07 mode “01” and mode “03”
08 mode “00” or mode “02”
09 mode “00” or mode “03”
0A mode “01” or mode “02”
0B mode “01” or mode “03”
0C Day-Night Mode
Inquiry Command Command Packet Inquiry Packet Comments
CAM _ Alarm Inq 8x 09 04 6B FF y0 50 02 FF On
y0 50 03 FF Off
CAM _ Alarm Mode Inq 8x 09 04 6C FF y0 50 pp FF pp: Alarm Mode
CAM_AlarmDayNightLevel Inq 8x 09 04 6D FF y0 50 0p 0p 0p ppp: Day setting AE Level
0q 0q 0q 0r 0r 0r FF qqq; Night setting AE Level
rrr: Now AE Level
CAM_AlarmDetLevelInq 8x 09 04 6E FF y0 50 01 FF Detect Level is High.
y0 50 00 FF Detect Level is Low.