Filter
Top Products
42
Command List
Command List (4/4)
Command Set Command Command Packet Comments
CAM_PrivacyZone SetMask 8x 01 04 76 mm nn mm: Mask Settings
0r 0r 0s 0s FF nn 00: Modify, 01: New
rr: W, ss:H
Display 8x 01 04 77 pp pp pp pp FF Mask Display ON/OFF
pp pp pp pp: Mask Settings (0: OFF, 1: ON)
SetMask Color 8x 01 04 78 pp pp pp pp pp pp pp pp: Mask Color Settings
qq rr FF qq: “0” Color Settings
rr: “1” Color Settings
SetPan TiltAngle 8x 01 04 79 0p 0p 0p Pan/Tilt Angle Settings
0q 0q 0q FF ppp: Pan
qqq: Tilt
SetPTZMask 8x 01 04 7B mm 0p 0p 0p Pan/Tilt/Zoom Settings for Mask
0q 0q 0q 0r 0r 0r 0r FF mm: Mask Setings
ppp: Pan, qqq: Tilt, rrrr: Zoom
Non_InterlockMask 8x 01 04 6F mm mm: Non-Interlock Mask Settings
0p 0p 0q 0q 0r 0r 0s 0s FF pp: X, qq: Y, rr: W, ss: H
GridOn 8x 01 04 7C 02 FF Grid Display On
GridOff 8x 01 04 7C 03 FF Grid/Center Line Display Off
CAM_KeyLock Off 8x 01 04 17 00 FF Camera Control Enable/Disable
On 8x 01 04 17 02 FF
CAM_IDWrite 8x 01 04 22 0p 0q 0r 0s FF pqrs: Camera ID (=0000 to FFFF)
CAM_Alarm On 8x 01 04 6B 02 FF Alarm ON/OFF
Off 8x 01 04 6B 03 FF
SetMode 8x 01 04 6C pp FF PP: Mode Settings
00 Focus Move Detection (The rest position is fixed.)
01 Focus Move Detection (The rest position is reset.)
02 AE Move Detection (The rest value is fixed.)
03 AE Move Detection (The rest value is reset.)
0C Day/Night detection
SetDayNightLevel 8x 01 04 6D 0p 0p 0p 0q 0q 0q FF ppp: Day Detect Level Setting
qqq: Night Detect Level Setting
Alarm (Reply) y0 07 04 6B 01 FF Detect Level “Low” t ”High”
y0 07 04 6B 00 FF Detect Level “High” t ”Low”
CAM_ContinuesZoomPosReply
On 8x 01 04 69 02 FF ZoomPos continuous ON/OFF
Off 8x 01 04 69 03 FF
(Reply) y0 07 04 69 0p 0p 0q 0q 0q 0q FF pp: FD-Zoom Position
* 00 setting when mode is Combine
qqqq: Zoom Position
CAM_ReplyIntervalTimeSet
8x 01 04 6A 00 00 0p 0p FF pp: Interval Time [V timing]
CAM_RegisterValue 8x 01 04 24 mm 0p 0p FF mm: Register # (=00-7F)
pp: Register Value (=00-FF)
…