Filter
Top Products
31
Enjoying with a computer
2 Click [Safely remove USB Mass Storage
Device].
3 Click [OK] (Windows 2000 only).
4 Touch [END] on the screen of your
camcorder.
5 Touch [YES] on the screen of your
camcorder.
6 Disconnect the USB cable from the
Handycam Station and the computer.
b Notes
• Do not disconnect the USB cable while the
ACCESS lamp is lit.
• Before turning off your camcorder, disconnect
the USB cable following the proper procedures
described above.
• Disconnect the USB cable using the proper
procedures described above. Otherwise, files
stored on the hard disk of your camcorder or in a
“Memory Stick Duo” may not be updated
correctly. Also, disconnecting the USB cable
improperly may cause a malfunction of the hard
disk of your camcorder or of the “Memory Stick
Duo.”