Filter
Top Products
75
Customizing Your Camcorder
• flashes slowly if [ONE PUSH] could not
be set.
• When [ONE PUSH] was selected, if keeps
flashing after touching , set [WHITE BAL.]
to [AUTO].
• If you set [WHITE BAL.], [SCENE
SELECTION] is set to [AUTO].
z Tips
• If you have changed the battery pack while
[AUTO] was selected, or bring your camcorder
outdoors from inside the house, or vice versa,
select [AUTO] and aim your camcorder at a
nearby white object for about 10 seconds for
better color balance adjustment.
• When the white balance has been set with [ONE
PUSH], if you change the [SCENE
SELECTION] settings, or bring your camcorder
outdoors from inside the house, or vice versa,
you need to redo the [ONE PUSH] procedure to
readjust the white balance.
When you set [COLOR SLOW SHTR] to
[ON], appears, and you can record an
image brighter in color even in dark places.
b Notes
• Adjust the focus manually ([FOCUS], p. 72)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
The image will be recorded at a maximum
of 16 times the sensitivity of NightShot
recording, if you set [SUPER
NIGHTSHOT] to [ON] while the
NIGHTSHOT switch (p. 32) is also set to
ON.
appears on the screen.
To return to the normal setting, set [SUPER
NIGHTSHOT] to [OFF].
b Notes
• Do not use [SUPER NIGHTSHOT] in bright
places. This may cause a malfunction.
• Do not cover the infrared port with your fingers
or other objects (p. 32).
• Remove the conversion lens (optional).
• Adjust the focus manually ([FOCUS], p. 72)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
You can record a transition with the
following effects added to the interval
between scenes.
1 Select the desired effect during fading in
(in [STBY]) or during fading out (in
[REC]), then touch .
2 Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the fader before starting the
operation, touch [OFF] in step 1.
If you press START/STOP, the setting is
canceled.
WHITE FADER
BLACK FADER
When you select [OLD MOVIE],
appears and you can add an old movie
effect to images.
To cancel [D.EFFECT], touch [OFF].
COLOR SLOW SHTR
(Color Slow Shutter)
SUPER NIGHTSHOT
FADER
D.EFFECT (Digital effect)
STBY REC
Fading out Fading in