Filter
Top Products
7
Tally Lamp
A Tally Lamp is included in the connector panel of the
camcorder body.
Slot-in Wireless Microphone Receiver
(Built-in UHF Synthesizer Receiver Unit)
The optional WRR-855B Wireless Microphone
Receiver can be fitted directly to the HDW-750P/730S
camcorder using a slot-in mechanism that gives a
cable less interface between the camcorder and the
receiver. This system increases
mobility by maintaining
compact overall dimensions
even when the receiver is
attached to the camcorder.
*WRR-855B is an option.
Turbo Gain
The inherent sensitivity of the HDW-750P/730S is
high enough to capture images under various low
light conditions, but in some situations it is neces-
sary to image in unusually low light conditions.
The Turbo Gain function immediately boosts the
gain level to +42 dB at the touch of the button.
Thanks to this function, it is possible to capture
critical scenes down to around 0.3 lux of incident
scene illumination.
LCD Status Panel and
Diagnostic System
All the main operational controls
and switches are located on the
left-hand side of the camcorder.
The LCD panel is on the same
side, and shows a wide range of
status and diagnostic displays
such as Tape Remaining, Battery
Level, Audio Levels, etc.
Stereo Audio Output
A stereo audio line output is available from the 5-pin
XLR connector on the rear of the camcorder.
This provides two analogue audio output channels,
which can be selected to be either Channel-1/2 or
Channel-3/4.