Filter
Top Products
74
Custom setting
The various flash settings may be changed as necessary.
The following eight items may be changed.
• HSS setting (on/off)
• Wireless channel setting (channels 1 to 4)
• Wireless controller mode setting (1/2)
• Recording mode in which manual flash or multiple-flash may be set (M mode
only/all modes)
• Test-flash setting (once/3 times/4 seconds)
• Time to power save (30 seconds/3 minutes/30 minutes/none)
• Time to power save when using wireless flash (60 minutes/none)
• Flash range units (m/ft)
Performing the custom setting
The custom setting is changed as follows.
1 Press the Fn button for three seconds while the
POWER switch is set to ON.
• The first item (HSS setting) is displayed.