Filter
Top Products
83
Using the Menu
EDGE CROP
Outputs the central portion of the original
image by cropping its right and left edges.
b Notes
• When you view a movie recorded in the
DVCAM (DV) format with [DV WIDE REC]
set to [ON] on a standard 4:3 TV, images of the
movie may appear vertically compressed. In
such a case, set [DV WIDE CONV] to
[LETTER BOX] or [EDGE CROP].
x DV WIDE CONV
You can select a down convert type when
you down-covert DV widescreen signal to
DV signal.
Use this function for signals outputting
from the following output jacks:
– Component (480i)
– S Video
– Audio/Video
BSQUEEZE
Outputs a horizontally compressed image
while maintaining its original height.
LETTER BOX
Outputs an image with black bars added to
the top and bottom of the original image,
while maintaining the original aspect ratio.
EDGE CROP
Outputs the central portion of the original
image by cropping its right and left edges.
x SD-SDI SET
VIDEO INDEX
Adds a video index signal that includes
information on aspect ratio and signal
format to SDI output signals. The default
setting is [ON].
RP188 ATC
Adds an Ancillary Time Code (ATC) to
the SDI output signal. The default setting
is [ON].
VITC LINESEL
Selects the vertical blanking interval line
of the SD video signal, in which the
vertical interval time code (VITC) is
recorded, between 12 and 20. The default
setting is 16.
x HDV t DV CONV
When you set this function to [ON], you can
convert HDV format signals to DV format
signals and output the DV format signals to an
external device via the HDV/DV (i.LINK)
jack. You can output DV format signals
without any format conversion. The default
setting is [OFF].
x DOWN CONVERT
You can set a down convert type when you
set [HDV t DV CONV] to [ON] to
convert HDV format signals to DV format
signals.
BSQUEEZE
Outputs a horizontally compressed image
while maintaining its original height.
EDGE CROP
Outputs the central portion of the original
image by cropping its right and left edges.
x DOWN CONV AU
BCH1,CH2
Outputs audio signals from CH1 and CH2.
CH3,CH4
Outputs audio signals from CH3 and CH4.
b Notes
• When you set [HDV t DV CONV] to [ON]
during 4-channel audio recording on an HDV
device, only audio in the channel selected in
[DOWN CONV AU] is outputted from the
HDV/DV (i.LINK) jack.
• For i.LINK connection, see [VCR HDV/DV]
(p. 80).
• Disconnect the i.LINK cable before setting
[i.LINK SET]. Otherwise, the connected video
device may not be able to recognize the video
signal from your camcorder.
• Even when you select [CH3,CH4] during
HDV2CH recording, only audio in CH1 and
CH2 will be outputted from the HDV/DV
(i.LINK) jack.
i.LINK SET
Continued ,