Filter
Top Products
27
Recording/Playback
Changing the settings of your camcorder
recordings
.
Set the ZOOM switch E to SERVO.
Move the power zoom lever D slightly for
a slower zoom. Move it further for a faster
zoom.
z Tips
• The minimum distance required between your
camcorder and the subject for focus is about 1
cm (about 13/32 in.) for wide angle and about
80 cm (about 2 5/8 feet) for telephoto.
• The focus may not be adjusted at certain zoom
positions if the subject is within 80 cm (about 2
5/8 feet) from your camcorder.
• When you set [FOCUS MACRO] to [OFF] or
the focus ring to the mode A position (p. 28),
you cannot focus on a subject within 80 cm
(about 2 5/8 feet) regardless of the zoom
position (p. 72).
• Be sure to keep your finger on the power zoom
lever D. If you move your finger off the power
zoom lever D, the operation sound of the
power zoom lever D may also be recorded.
1 Set the ZOOM switch E to SERVO.
2 Set the handle zoom switch B to VAR
or FIX.
z Tips
• When you set the handle zoom switch B to
VAR, you can zoom in or out at variable
speed.
• When you set the handle zoom switch B to
FIX, you can zoom in or out at fixed speed
set in [HANDLE ZOOM] (p. 72).
3 Press the handle zoom lever A to zoom
in or out.
b Notes
• You cannot use the handle zoom lever A when
the handle zoom switch B is set to OFF.
• You cannot change the zoom speed of the zoom
lever D with the handle zoom switch
B.
You can zoom at the desired speed by
turning the zoom ring C. Fine adjustment
is also possible.
1 Set the ZOOM switch E to MANUAL.
2 Turn the zoom ring C to zoom in or
out.
z Tips
• You can remove the zoom pin.
Adjusting the zoom
Using the zoom lever
Close view: (Telephoto)
Wide view: (Wide angle)
Using the handle zoom
Using the zoom ring
Continued ,