Filter
Top Products
Specifications for CV-M300
Switch Setting
SHUTTER
TRIGGER
ACCUMM
INTERLACE
GAMMA
GAIN
OFF ON
1
2
3
4
5
6
7
8
Normal < > External
Field < > Frame
Interlace < > Non-interlace
1.0 < > 0.45
Manual < > Auto
1/60
1/100
1/250
1/500
1/1000
1/2000
1/4500
1/10,000
Seconds
< < < < > > > >
< < > > < < > >
< > < > < > < >
Connection Description
Hirose HR 10A-10R-12P. Male.
Pin 1 Ground
2 +12V DC
3 Ground
4 Video output
5 Ground
6 HD in/(HD output)
7 VD input/
(VD/WEN output)
8 Ground
9 Pixel clock output
(sine) optional**
10 Ground
11 +12V DC
12 Ground
Hirose HR 10A-7R-6P. Male.
Pin 1 N.C.
2 EEN output
3 Ground
4 N.C.
5 Trig. input
6 WEN pulse output
**Pixel clock output by internal
jumper setting.
DC-IN/SYNC.
TRIGGER
Spectral Sensitivity
Dimensions
Scanning system 625 lines 525 lines
25 frames/sec. 30 frames/sec.
CCD sensor Monochrome 2/3" IT CCD
Sensing area 8.8 mm (h) x 6.6 mm (v)
Effective pixels 752 (h) x 582 (v) 768 (h) x 494 (v)
Pixels in video output 737 (h) x 575 (v) 758 (h) x 486 (v)
Cell size 11.6 (h) x 11.2 (v) µm 11.6 (h) x 13.5(v) µm
Resolution (horizontal) 560 TV lines 570 TV lines
Sensitivity on sensor 0.05 Lux, Max gain, 50% video
S/N ratio >59 dB (AGC off, Gamma 1)
Video output Composite VS signal 1.0 Vpp, 75 Ohm
Gamma 0.45 – 1.0
Gain Manual – Automatic
Potentiometer – AGC
Gain range 0 to +18 dB
Scanning 2:1 interlace – non-interlace
Accumulation Field – frame
Synchronization Int. X-tal. or Ext. HD/VD or random trigger
HD sync. input/output 4 Vpp, 75 Ohm*
VD sync. input/output 4 Vpp, 75 Ohm*
Trigger input 4 Vpp, 75 Ohm*
WEN output (write enable) 4 Vpp, 75 Ohm*
EEN output (exposure enable) 4 Vpp , 75 Ohm*
Pixel clock out (optional) 4 Vpp, 75 Ohm
Trigger modes Normal, Edge pre-select,
Pulse width control and Start/stop
Trigger input duration >H to <1000H. (CCIR: 64 µsec. to 1 msec.,
EIA: 63.5 µsec. to 1 msec.)
Internal and edge pre-select 1/50, 1/100, 1/250, 1/500, 1/1000,
1/2000, 1/4500, 1/10,000 sec.
Pulse width control 1H to 251H
Start/stop 1/77 to 1/10,000 sec.
Long time exposure 1 field to
∞∞
∞∞
∞
Duration between ext. VD pulses
Operating temperature -5°C to + 45°C
Humidity 20 – 80% non-condensing
Power 12V DC ±10%. 3.6 W
Lens mount C-mount
Dimensions 40 x 50 x 80 mm (HxWxD)
Weight 230 g
* HD sync., VD sync./(Trigger) input or output by internal jumpers.
Factory setting: HD/VD input. Inputs TTL or 75 Ohm terminated by
internal jumpers. Factory setting: 75 Ohm terminated.
Specifications CV-M300C CV-M300E
Company and product names mentioned in this datasheet are trademarks or registered trademarks of their respective owners.
JAI A
.
S cannot be held responsible for any technical or typographical errors and reserves the right to make changes to products and documentation without prior notification.
31010442.05.01.2000
CV-M300C 2/3” Industrial Monochrome Camera. CCIR
CV-M300E 2/3” Industrial Monochrome Camera. EIA
Ordering Information
Top view
26
550
4-M3
Front view
50
(1.97)
40
(1.57)
C-mount
Side view
80 12.7
26
13
Bottom view
4-M3
34
4-M3
30
14
30
U1/4-20
ø6
Rear view
Visit our web site on www.jai.com
JAI Corporation, Japan
Phone +81 45 933 5400
Fax +81 45 931 6142
www.jai-corp.co.jp
JAI A
.
S, Denmark
Phone +45 4457 8888
Fax +45 4491 8880
www.jai.com
JAI UK Ltd., England
Phone +44 1442 879 669
Fax +44 1442 879 281
www.jai.com
JAI America Inc., USA
Phone (Toll-Free) +1 877 472-5909
Phone +1 949 472-5900
Fax +1 949 472-5908
www.jai.com
JAI Vision OY, Finland
Phone +358 9 8256220
Fax +358 9 870 3345