Filter
Top Products
123
“Memory Stick” Operations
Recording a still image from other equipment
Before operation
Set DISPLAY in to LCD in the menu settings. (The default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) When using the A/V connecting cable, set VIDEOINPUT to the appropriate
position depending on the player. (p. 83)
(3) Play back the recorded tape on the VCR, or turn the TV on to see the desired
program.
The image of the other equipment is displayed on the LCD screen or in the
viewfinder.
(4) At the point where you want to record, follow the steps 3 and 4 on page 121.
Using the A/V connecting cable
If your TV or VCR has an S video jack
Connect using the S video plug to faithfully obtain original pictures. With this
connection, you do not need to connect the yellow (video) plug of the A/V connecting
cable. Connect the S video plug to the S video jack of the VCR.
Recording an image from a tape as a still image
S VIDEO
VIDEO
OUT
A/V
A/V connecting cable (supplied)
Black
Yellow
: Signal flow
VCR