Filter
Top Products
7-EN
EN
F
ES
Installing positon of the screw plate
1 DCR-TRV9
2 DCR-TRV890/TRV900
Preparing
1 Preparing the camcorder
The DCR-TRV9 is the model used for illustration purposes. Otherwise, the model name
is indicated in the illustrations. Any differences in operation are clearly indicated in the
text, for example, “DCR-TRV9 only”.
For details, please refer to the operating instructions supplied with your camcorder.
(1)Remove the lens cap, shoulder strap, conversion lens or filter from the
camcorder.
(2)Attach a charged battery pack.
(3)Insert a cassette tape.
(4)For DCR-TRV7 and DCR-TRV9, attach the reflex prevention ring to the tip of the
lens.
(5)Attach the camera mounting shoe A (for DCR-TRV7) or the camera mounting
shoe B* (for DCR-TRV9/TRV890/TRV900).
Remove the metal part from the camera mounting shoe B and fasten the screw.
For DCR-TRV9/TRV890/TRV900, connect the A/V connecting cable of the
camera mounting shoe B to the camcorder’s AUDIO/VIDEO jack.
(6)Adjust the camcorder.
(7)For DCR-TRV9/TRV890/TRV900, cancel the following functions: BACK
LIGHT,NightShot, PROGRAM AE and picture effect.
* To attach the camera mounting shoe B
Attach the screw plate to the camera mounting shoe B.