Filter
Top Products
11-EN
EN
F
ES
Attach the sunshade until
it fits firmly.
LEAK lamp (yellow)
To attach a wide-conversion lens (not supplied)
Attach a wide-conversion lens until it
fits firmly. When you use a wide-
conversion lens, keep zooming W. The
picture will dim by pressing zoom T.
You can attach a wide-conversion lens
underwater.
Note
When you use a colour filter, remove it
then attach a wide-conversion lens.
Using the supplied sunshade
The supplied sunshade for the LCD
monitor reduces glare from the LCD
monitor. Attach the sunshade as shown
in the illustration.
You can attach the wide-conversion lens, sunshade, and colour filter
underwater
If the image on the LCD screen is not clear because of the air remains between these
accessories and the marine pack, reattach them underwater.
When the LEAK lamp flashes
If water happen to leak in , the LEAK
lamp (yellow) flashes.
In such a case, remove the marine pack from the water as soon as possible, keeping it
horizontal. Be sure to surface following the safety rules for diving.
Dry the marine pack with a soft cloth and then open it.
To switch off the lamp, disconnect the remote control cable.
Check the cause of the leak.
If the camcorder is wet, take it to the nearest Sony dealer immediately.
VCL-MK1 (be included in
the accessory kit ACC-MK1)