Filter
Top Products
64
US
(Warning indicator pertaining to
formatting of the external media device)
The external media device is damaged.
The external media device is not formatted
correctly.
The camcorder is unsteady. Hold the camcorder
steady with both hands. However, note that
the camera-shake warning indicator does not
disappear.
The memory card is full. Delete unnecessary
images (
p. 44).
Photos cannot be recorded during processing.
Wait for a while, then record.
Recording time of
movies/number of
recordable photos
“HD” stands for high definition image
quality, and “STD” stands for standard
image quality.
Expected time of recording and
playback with each battery pack
Recording time
Approximate time available when you use a
fully charged battery pack.
(unit: minute)
Battery pack Continuous
recording time
Typical recording
time
Image quality HD STD HD STD
NP-FV70
(supplied)
160
145
170
150
90
80
95
80
NP-FV100 325
295
340
305
180
160
185
165
Top: When recording with the LCD screen
Bottom: When recording with viewfinder
Each recording time is measured under the
following conditions.
[
REC Mode]: Standard (default
setting)
Using the mount adaptor LA-EA3 (supplied)
and the SAL-2470Z lens (sold separately)
Typical recording time shows the time when
you repeat recording start/stop, switching the
MODE lamp, and zooming.
Times measured when using the camcorder at
25
C (77 °F). 10 C to 30 C (50 °F to 86 °F) is
recommended.
The recording and playback time will be
shorter when you use your camcorder in low
temperatures.
The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
Playing time
Approximate time available when you use a