Filter
Top Products
30
30
Studio VTRs
AC 100 to 120 V, 50/60 Hz
5 °C to 40 °C (41 °F to 104 °F)
-20 °C to 60 °C (-4 °F to 140 °F)
427 x 174 x 494 mm (16 7/8 x 6 7/8 x 19 1/2 inches) (excluding external projections)
28.193 mm/s
Standard size: More than 184 min. with PDV-184ME/184N, Mini size: More than 40 min. with PDVM-40ME/40N
Standard size: Less than 3 min. with PDV-184ME/184N, Mini size: Less than 1 min. with PDVM-40ME/40N
When controlling via RS-422A: Search speed is up to 32 times, forward and reverse
When controlling via DSRM-10:
Jog mode: Frame by frame to x2, forward and reverse
Shuttle mode: 8 steps, still to x16 normal speed, forward and reverse
Digital slow mode: 3 steps, still, x1/5 and x1/10 normal speed, forward and reverse
Jog audio mode: x1/30 to x1, forward and reverse
30 Hz to 5.0 MHz ±1.0 dB 5.75 MHz +0/-3.0 dB (typical measurement)
30 Hz to 1.5 MHz +1.0/-5.0 dB
More than 55 dB
Less than 2.0 %
Less than 30 nsec.
2CH mode (48 kHz/16-bit): 20 Hz to 20 kHz +0.5/-1.0 dB, 4CH mode (32 kHz/12-bit): 20 Hz to 14.5 kHz +0.5/-1.0 dB
More than 85 dB
Less than 0.05 %
Composite, BNC x2, loop-through connection, 1.0 Vp-p, 75 Ω, sync negative
Composite, BNC x2, loop-through connection, 1.0 Vp-p, 75 Ω, sync negative
DIN 4-pin, Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.286 Vp-p, 75 Ω (at burst level)
BNC x2*, active-through connection, Conforms to Serial Digital Interface (270 Mbps), SMPTE 259M
* Using optional DSBK-120 SDI Input/Output Board
BNC x1, Conforms to SDTI (270 Mbps), SMPTE 305M
XLR 3-pin female x4, -9 dBu to 28 dBu, 600 Ω/10 kΩ, balanced
XLR 3-pin female x2, 110 Ω, balanced
BNC x1, Black burst: 0.286 Vp-p, 75 Ω, sync negative, Composite sync*: 2.0 Vp-p, 75 Ω, sync negative
*when not adding sync to RGB output
Composite, BNC x2, 1.0 Vp-p, 75 Ω, sync negative * Video 1/2 (SUPER)
BNC x3, Y/R-Y/B-Y: Y: 1.0 Vp-p, 75 Ω, sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω (75 %)
R.G (w/o Sync).B: 0.7 Vp-p, 75 Ω
G (w/Sync): 1.0 Vp-p, 75 Ω, sync negative
DIN 4-pin, Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.286 Vp-p, 75 Ω (at burst level)
BNC x2, Conforms to Serial Digital Interface (270 Mbps), SMPTE 259M * Using optional DSBK-120 SDI Input/Output Board for DSR-85/80 and DSBK-100 SDI Output Board for DSR-60
BNC x1, Conforms to SDTI (270 Mbps), SMPTE 305M *Using optional DSBK-110 QSDI Output Board for DSR-60
XLR 3-pin male x4, 4 dBu, 600 Ω loading, low impedance, balanced
XLR 3-pin male x2, 2 to 7 Vp-p, 110 Ω, balanced
BNC x1, 0.5 Vp-p to 18 Vp-p, 3 kΩ, unbalanced * Using optional DSBK-130 Time Code Input/Output Board
BNC x1, 2.2 Vp-p, 600 Ω, unbalanced * Using optional DSBK-130 Time Code Input/Output Board
RS-422A: 9-pin multi connector x1
TBC: D-sub 15-pin connector x1
Control-S (SIRCS): Stereo mini jack x1
Audio monitor: RCA phono jack x1, -6 dBu, 47 kΩ, unbalanced
Headphones: JM-60 headphone jack x1, -16 dBu, 8 Ω, unbalanced
AC Power Cord (x1), RCC-5G Remote Control Cable (x1),
Operation Manual (x1), ClipLink Guide (x1)
DSR-60
Editing Player
85 W
18 kg (39 lb 10 oz)
—
—
—
—
—
—
—
—
—
—
—
—
—
DSR-85
High-speed Editing Recorder
185 W
21 kg (46 lb 4 oz)
BNC x3, Luminance: 1.0 Vp-p, 75 Ω, sync negative
Chrominance: 0.7 Vp-p, 75Ω
—
—
BNC x1, 0.286 Vp-p, 75 Ω, sync negative
BNC x3 ,Luminance: 1.0 Vp-p, 75 Ω, sync negative Chrominance: 0.7 Vp-p, 75 Ω
—
—
DSR-80
Editing Recorder
140 W
19 kg (41 lb 14 oz)
—
BNC x3, Y/R-Y/B-Y: Y: 1.0 Vp-p, 75 Ω, sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω (75 %)
R.G (w/o Sync).B: 0.7 Vp-p, 75 Ω
G (w/Sync): 1.0 Vp-p, 75 Ω, sync negative
—
—
—