Filter
Top Products
102
Table of Contents Enjoy Useful Functions Index
US
The file format is not supported by your
camcorder (p. 114).
Recording
Refer also to “Memory card” (p. 101).
Pressing START/STOP or PHOTO does not
record images.
The playback screen is displayed. Press MODE
to turn on the
(Movie) or (Photo) lamp
(p. 25).
Your camcorder is recording the image you
have just shot on the recording media. You
cannot make new recording during this
period.
The recording media is full. Delete
unn
e
cessary images (p. 51).
Total number of movie scenes or photos
exceeds the recordable capacity of your
c
a
mcorder. Delete unnecessary images (p. 51).
While [Drop Sensor] is activated (p. 96), you
may not be able to record images (HDR-PJ50/
PJ50V/XR160).
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
Photos cannot be recorded.
You cannot record photos together with:
[Smth Slw REC]
[Golf Shot]
[
Fader]
The camcorder cannot shoot photos while it
is in the movie recording mode, depending
on the [
REC Mode] or [ Frame Rate]
selected.
The access lamp remains lit or flashing
even if recording was stopped.
Your camcorder is recording the scene you
have just shot on the memory card.
The imaging field looks different.
The imaging field may look different
depending on the condition of your
camcorder. This is not a malfunction.
The flash does not work (HDR-CX360/
CX360V/PJ30/PJ30V/PJ50/PJ50V).
You cannot record with the built-in flash
while:
the (movie) lamp is on
[Conversion Lens] is set to other than [Off]
Even if auto flash or (Auto redeye
reduction) is selected, you cannot use the
flash with:
[Spot Meter/Fcs]
[Spot Meter]
[Manual] in [Exposure]
[Twilight ], [Sunrise&Sunset], [Fireworks],
[Landscape], [Spotlight], [Beach] or [Snow]
in [Scene Selection]
The actual recording time for movies is
less than the expected recording time of
the recording media.
Depending on the recording conditions, the
time available for recording may be shorter,
for example when recording a fast moving
object, etc.
The camcorder stops operating.
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
If you keep applying vibration on the
camcorder, recording may stop.