Sony PJ50V Camcorder User Manual


 
107
Table of Contents Enjoy Useful Functions Index
US
(Warning indicators pertaining to
memory card formatting)
The memory card is damaged.
The memory card is not formatted correctly
(p.
90).
(Warning indicator pertaining to
incompatible memory card)
Incompatible memory card is inserted (p. 22).
(Warning indicator pertaining to
the write-protect of the memory card)
The memory card is write-protected.
Access to the memory card was restricted on
another device.
(Warning indicator pertaining to the
external media device)
The image data base file may be damaged.
Check the data base file by touching
(MENU) [Setup] [
(Media Settings)]
[Repair Img. DB F.] the recording
medium.
The external media device is damaged.
(Warning indicator pertaining to
formatting of the external media device)
The external media device is damaged.
The external media device is not formatted
correctly.
(Warning indicator pertaining to the
flash)
Fast flashing
There is something wrong with the flash.
(Warning indicator pertaining to
camera-shake warning)
The amount of lights is not sufficient, so
camera-shake easily occurs. Use the flash
(HDR-CX360/CX360V/PJ30/PJ30V/PJ50/
PJ50V).
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
(Warning indicator pertaining to drop
sensor)
The drop sensor function (p. 96) is activated,
and has detected that the camcorder has
been dropped. Therefore, the camcorder is
taking steps to protect the internal hard disk.
Recording/playback may be disabled as a
result.
The drop sensor function does not guarantee
the protection of the internal hard disk under
all possible situations. Use the camcorder
under stable conditions.
(Warning indicator pertaining to
photo recording)
The recording media is full.
Photos cannot be recorded during processing.
Wait for a while, then record.
When [
REC Mode] is set to [Highest
Quality
] or [60p Quality ], you cannot
capture photos while recording movies.
Furthermore, if [
Frame Rate] is set to
[24p] (HDR-CX360/CX360V/PJ30/PJ30V/
PJ50/PJ50V), you cannot record photos while
the camcorder is in movie recording standby
mode.
Tips
You may hear a melody when some warning
indicators appear on the screen.