Filter
Top Products
Outputting the Color Bars and Reference Tone
55
Recording
The camcorder can output a color-bar signal in
place of the camera picture.
A 1-kHz reference tone is output with the color
bar signal if “1kHz Tone” of “Audio Input” (page
106) is set to “On” with the AUDIO SET menu.
The color-bar and reference-tone signals are fed
out from the HD SDI (A/B), SDI OUT, HDMI
OUT, and i.LINK (HDV/DV) connectors. The
VIDEO OUT connector outputs the color-bar
signal only.
Press the BARS/CAM button.
The camera picture is switched to color bars.
To return to the camera picture, press the button
again.
You can select the type of color bars with “Color
Bar Type” (page 103) of the CAMERA SET
menu.
Multi: ARIB multiformat color bars
75%: Vertical stripes of 75% luminance
100%: Vertical stripes of 100% luminance
Notes
• When recording of the camera image is in
progress, it cannot be switched to the color-bar
picture even if you press the BARS/CAM
button. (You can switch the color-bar picture to
the camera picture.)
• The color bar mode cannot be selected in Slow
& Quick Motion mode.
Outputting the Color
Bars and Reference
Tone
PLAY/PAUSE
F FWD
THUMBNAIL
BARS/CAM F REV
PREV STOP NEXT
lsL
j
G
/SJ
BARS/CAM button