Filter
Top Products
Camera Operation
COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual
2322
3. Please press the LEFT or RIGHT button if you wish to change mode.
• When the LEFT or RIGHT button is pressed, available values and modes are
displayed in order. Please keep pressing the button until you get to the mode
you wish to operate.
4. Please select 'EXIT' and then press the SETUP button to finish the setting.
Select any function you
wish to operate by
using the UP and
DOWN buttons.
Modes can be changed
using the LEFT and
RIGHT buttons.
• If appears at the mode you wish to operate, it means that there is a sub-
menu which can be selected by pressing the SETUP button.
• If---appears at the mode item, it means that there is no mode available to be
selected.
Notes
LENS (selection)
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow
to point to 'LENS' by using the UP and DOWN buttons.
2. Please select the type of the lens you wish to use by pressing the LEFT or
RIGHT button.
3. Please press the SETUP button if you wish to return to the previous menu.
DC/VIDEO: Auto iris lens selection
MANUAL: Manual lens selection
• When using an auto iris lens, the setting of the auto iris lens selection switch,
located on the back of the camera, must be on DC or
VIDEO depending on the type of the lens which is
being used. (Please refer to the picture on page 15)
• The brightness of the screen can be adjusted in DC
mode. The brightness can be adjusted within the
range of 1 ~ 70. The optimum level of brightness for
the user can be achieved by adjustment.
Notes