Filter
Top Products
COLOR CCD CAMERA User’s Manual
33
COLOR CCD CAMERA User’s Manual
32
Camera Operation
5) When a name has been chosen, please select a position for the name display.
³ Please move the cursor onto 'POS' and then press the SETUP button.
· The name will appear at the top left hand
corner.
» Please find the position you wish to
display the name by using the 4
directional buttons, and then press the
SETUP button.
6) Please select 'END' and then press the SETUP button to complete ID input.
to Locate, then SETto Locate, then SETto Locate, then SET
FRONT DOOR
to Locate, then SET
FRONT DOOR
SYNC : Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL
LINE-LOCK. In LINE-LOCK mode, it synchronizes the video signal between
cameras without a synchronous generator. The line-lock synchronization
is only used in the areas of 60Hz (NTSC Models) / 50Hz (PAL Models).
- INT : Internal synchronization - LL : External line-lock synchronization
• If you choose ‘LL’, you can adjust the desired phase. Press the SET button.
• You can adjust the desired phase from 0 to 359.
COLOR (Electronic DAY & NIGHT)
- AUTO :
This camera has a function which electronically changes to the appropriate
mode for daytime or night-time. The COLOR mode is operated for
daytime, and it converts to BW mode for night-time.
- ON : The color mode is selected electronically.
• If AGC is OFF, you can’t select AUTO mode.
• When an infrared light is used, there may be a problem with focusing and
COLOR (DAY & NIGHT).
Note
• When the power frequency is 50Hz, you can not use line-lock mode (NTSC
Models).
• When the power frequency is 60Hz, you can not use the line-lock mode (PAL
Models).
• ‘Sync.’ mode is fixed to ‘INT’ in DC 12V input power.
Note