Filter
Top Products
62
Removing the Eyepiece cup
When attaching the FDA-A1AM Angle Finder (sold separately) to the
camera, remove the Eyepiece cup.
Note
• When an FDA-A1AM Angle Finder (sold separately) is attached to the camera,
switch the display between the viewfinder and the LCD screen by pressing the
FINDER/LCD button. Setting [Eye-Start AF] to [Off] is recommended because the
eyepiece sensors located below the viewfinder may be activated.
Carefully slide the Eyepiece cup off
by pushing on each side of the
Eyepiece cup.
• Put your fingers under the Eyepiece cup,
and slide it upward.