Sony SNC-CS3P Security Camera User Manual


 
Overview
How to Use This User’s Guide / Precautions
7
How to Use This User’s
Guide
This User’s Guide explains how to operate the SNC-
CS3N/CS3P Network Camera from a computer.
The User’s Guide is written to be read on the computer
display.
As this section gives tips on using the User’s Guide, read
it before you operate the camera.
Jumping to the related page
When you read the User’s Guide on the computer
display, click on the sentence to jump to the related page.
Software display examples
Note that the displays shown in the User’s Guide are
explanatory examples. Some displays may be different
from the ones which appear as you operate the
application software.
Printing the User’s Guide
Depending on your system, certain displays or
illustrations in the User’s Guide, when printed out, may
differ from those as portrayed on your screen.
Installation Manual (printed matter)
The supplied Installation Manual describes the names
and functions of parts and controls of the Network
Camera, connecting examples and how to set up the
camera. Be sure to read the Installation Manual before
operating.
Precautions
This Sony product has been designed with safety in
mind. However, if not used properly electrical products
can cause fires which may lead to serious body injury.
To avoid such accidents, be sure to heed the following.
Heed the safety precautions
Be sure to follow the general safety precautions and the
“Operating Precautions.”
In case of a breakdown
In case of system breakdown, discontinue use and
contact your authorized Sony dealer.
In case of abnormal operation
If the unit emits smoke or an unusual smell,
If water or other foreign objects enter the cabinet, or
If you drop the unit or damage the cabinet:
1
Disconnect the camera cable and the connecting
cables.
2
Contact your authorized Sony dealer or the store
where you purchased the product.
Operating Precautions
Operating or storage location
Avoid operating or storing the camera in the following
locations:
Extremely hot or cold places (Operating temperature:
–10°C to + 50°C [14°F to 122°F])
Exposed to direct sunlight for a long time, or close to
heating equipment (e.g., near heaters)
Close to sources of strong magnetism
Close to sources of powerful electromagnetic
radiation, such as radios or TV transmitters
Locations subject to strong vibration or shock
Ventilation
To prevent heat buildup, do not block air circulation
around the camera.
Transportation
When transporting the camera, repack it as originally
packed at the factory or in materials of equal quality.
Cleaning
Use a blower to remove dust from the lens or optical
filter.
Use a soft, dry cloth to clean the external surfaces of
the camera. Stubborn stains can be removed using a
soft cloth dampened with a small quantity of detergent
solution, then wipe dry.
Do not use volatile solvents such as alcohol, benzene
or thinners as they may damage the surface finishes.