Filter
Top Products
102
“Memory Stick”
After making a USB
connection, “Picture
Package” does not
automatically start.
—
—
p Start up the “Picture Package Menu” and check [Settings].
p Make a USB connection when the computer is turned on
(page 83).
The image cannot be
played back on a
computer.
—
—
p If you are using the “Picture Package” application software,
click
on help at the upper-right corner of each screen.
p Consult the computer or software manufacturer.
The image and sound are
interrupted by noise when
you view a movie on a
computer.
• You are playing back the movie directly from
the
“
Memory Stick”.
p Copy the movie to the hard disk of your computer and then play
back the movie from the hard disk (pages 84, 85, 90 and 92).
You cannot print an
image.
— p Check the printer settings.
Images once copied to a
computer cannot be
viewed on the camera.
• Copied to a wrong folder. pCopy them to an available folder, such as “101MSDCF”
(page 88).
Symptom Cause Solution
Symptom Cause Solution
You cannot insert a
“Memory Stick.”
• You are inserting it backwards. p Insert it from the right side (page 18).
You cannot record on a
“Memory Stick.”
• The write-protect switch on the “Memory Stick”
is set to the LOCK position.
• The capacity of the “Memory Stick” is full.
• The image size is set to [640(Fine)] when
recording movies.
p Set it to the recording position (page 116).
p Delete unnecessary images saved in the “Memory Stick”
(pages 40 and 78).
p Insert a “Memory Stick PRO” (pages 76 and 116).
p Set the image size to other than [640(Fine)].
You cannot format a
“Memory Stick.”
• The write-protect switch on the “Memory Stick”
is set to the LOCK position.
p Set it to the recording position (page 116).
You have formatted a
“Memory Stick” by
mistake.
• All the data on the “Memory Stick” are deleted
by formatting. You cannot restore them.
p We recommend that you set the “Memory Stick” write-protect
switch to the LOCK position to prevent accidental erasure
(page 116).