Filter
Top Products
107
Troubleshooting
Others
Symptom Cause Solution
The camera does not
work, no operations can
be performed.
• The battery level is low or zero (The
indicator appears.).
• The AC Adaptor (not supplied) is not connected
securely.
pCharge the batteries (page 11).
pConnect it securely to the DC IN jack of the camera and to a wall
outlet (wall socket) (page 16).
The power is on, but the
camera does not work.
• The internal system is not working properly. p Remove, and then, after one minute, reinstall the batteries and
turn on the camera. If this does not work, press the RESET
button located inside the jack cover with a pointed object, then
turn the power on again. (This will clear the date and time
settings, etc.)
You cannot identify the
indicator on the LCD
screen.
— pCheck the indicator (pages 124 to 127).
The lens gets fogged. • Condensation is occurring. pTurn off the camera, leave the camera for about an hour and then
try to use it again (page118).
The camera gets hot if you
use it for a long time.
— pThis is not a malfunction.
The lens does not move
when you turn off the
camera.
• The batteries are discharged. pReplace them with charged batteries or use the AC Adaptor (not
supplied) (pages 11, 13, 16).