![](http://pdfasset.owneriq.net/4/89/489c14f8-14b1-4690-a51d-1d18d55060da/489c14f8-14b1-4690-a51d-1d18d55060da-bg51.png)
81
Using a Computer
DCR-HC32/HC42 2-584-906-11(1)
4 Start playback on the analog
video unit.
5 Start capturing procedures on
your computer.
Regarding operation, refer to the
operating instructions supplied with the
software or the on-line help.
After capturing images and sound, stop
capturing procedures on your computer,
and stop playback on the analog video
unit.
• The bundled software Picture Package or
ImageMixer VCD2 does not support the signal
convert function.
• You may not be able to output the pictures
correctly depending on the condition of the
analog video signal input to your camcorder.
• You cannot transfer pictures with copyright
protection signals to a computer.
• You can use a USB cable instead of an
i.LINK cable (optional) to transfer pictures
to a computer. Note, however, that the picture
displayed may lack the same smoothness.
• When you are using a USB cable or an i.LINK
cable to connect your camcorder to a computer,
make sure you insert the connectors in the
correct direction. If you insert the connectors
forcibly, they may be damaged, and cause a
malfunction of your camcorder.