Filter
Top Products
100
Changing the menu settings
Notes on formatting
•Supplied or optional “Memory Stick”s have been formatted at factory. Formatting with this
camcorder is not required.
•Do not turn the POWER switch or press any button while the display shows “FORMATTING.”
•You cannot format the “Memory Stick” if the write-protect tab on the “Memory Stick” is set to
LOCK.
•Format again if the message “ ” appears.
Formatting erases all information on the “Memory Stick”
Check the contents of the “Memory Stick” before formatting:
•Formatting erases sample images on the “Memory Stick.”
•Formatting erases the protected image data on the “Memory Stick.”
Icon/item
FORMAT
PHOTO SAVE
CM SEARCH
TITLEERASE
TITLE DSPL
TAPE TITLE
ERASE ALL
Mode
zRETURN
FORMAT
zON
OFF
zON
OFF
Meaning
To cancel formatting.
To format an inserted “Memory Stick.” 1. Select
FORMAT with the SEL/PUSH EXEC dial, then
press the dial. 2. Turn the SEL/PUSH EXEC
dial to select FORMAT, then press the dial.
3. After “EXECUTE” appears, press the SEL/
PUSH EXEC dial. “FORMATTING” appears
during formatting. “COMPLETE” appears
when formatting is finished.
To duplicate still pictures (p. 134).
To search using cassette memory (p. 63).
To search without using cassette memory.
To erase the title you have superimposed
(p. 91).
To display the title you have superimposed.
Not to display the title.
To label a cassette (p. 94).
To erase all the data in cassette memory.
POWER
switch
MEMORY
VTR
VTR
VTR
CAMERA
VTR
VTR
CAMERA
VTR
CAMERA