Filter
Top Products
7
Quick Start Guide
Recording a picture (p. 22)
Viewfinder
When the LCD panel
is closed, use the
viewfinder placing
your eye against its
eyecup.
1 Remove the hood cap.
2 Set the POWER switch to
CAMERA while pressing the
small green button. The date and
time is indicated for five
seconds.
If the ND1 or ND2 indicator
flashes, see page 65.
3 Slide OPEN
back in the B
mark
direction to
open the
LCD panel.
Monitoring the playback picture on the LCD
screen (p. 38)
1 Set the POWER
switch to VCR while
pressing the small
green button.
2 Press m to rewind the
tape.
3 Press N to start playback.
NOTE
Do not pick up your camcorder by holding
the viewfinder, the LCD panel, the battery
pack, or the microphone.
POWER
OFF
(CHG)
CAMERA
MEMORY
VCR
4 Press START/
STOP. Your
camcorder
starts recording.
To stop
recording, press
START/STOP
again.
POWER
OFF
(CHG)
CAMERA
MEMORY
VCR
REW
PLAY
OPEN
POWER
OFF
(CHG)
CAMERA
MEMORY
VCR