Filter
Top Products
15
Table of contents Useful recording techniques Index
US
Step 2: Turning the power on, and setting the
date and time
1
Open the LCD screen of your camcorder.
Your camcorder turns on.
2
Select the desired geographical area by selecting
/ with / of the
multi-selector, keep pressing the center of the multi-selector until the
desired geographical area is turned on a light.
See page 17 for the detail of using the multi-selector.
To set the date and time again, operate the multi-selector to select
(MENU) [Show
others] [CLOCK/
LANG] (under [GENERAL SET] category) [CLOCK SET]. When an
item is not on the screen, select
/ until the item appears.
3
Select [NEXT] with of the multi-selector, then press the center of the
multi-selector.
4
Select setting of [DST SET] or [SUMMERTIME] with / of the multi-
selector, and press the center of the multi-selector.
If you set [DST SET] or [SUMMERTIME] to [ON], the clock advances 1 hour.
POWER lamp
Multi-selector