Filter
Top Products
58
Removing dust from inside the viewfinder
– CCD-TRV32/TRV52/TRV312/TRV512 only
(1) Remove the screw with a screwdriver (not supplied). Then, while sliding the
RELEASE knob, turn the eyecup in the direction of the arrow and pull it out.
(2) Clean the surface with a commercially available blower.
Caution
Do not remove any other screws. You may remove only the screw to remove the
eyecup.
To reattach the eyecup
(1) Align the groove on the eyecup with the • mark on the barrel.
(2) Turn the eyecup in the direction of the arrow.
(3) Replace the screw.
Maintenance information and precautions
1
1
2
2