Filter
Top Products
111
Customizing Your Camcorder
Icon/item
* PROTECT
SLIDE SHOW
PHOTO SAVE
FILE NO.
DELETE ALL
FORMAT
Mode
ON
z OFF
——
——
z SERIES
RESET
z RETURN
OK
z RETURN
OK
Meaning
To protect selected images against accidental
erasure (p. 170)
To not protect images
To play back images in a continuous loop
(p. 168)
To copy still images on tape onto “Memory
Stick” (p. 138)
To assign numbers to file in sequence even if the
“Memory Stick” is changed
To reset the file numbering each time the
“Memory Stick” is changed
To cancel deleting all images
To delete all unprotected images
To cancel formatting
To format an inserted “Memory Stick”
1. Select FORMAT with the SEL/PUSH EXEC
dial, then press the dial.
2. Select OK with the SEL/PUSH EXEC dial,
then press the dial.
3. After EXECUTE appears, press the
SEL/PUSH EXEC dial. FORMATTING
flashes during formatting. COMPLETE
appears when formatting is finished.
POWER
switch
VCR
MEMORY
MEMORY
VCR
VCR
MEMORY
MEMORY
MEMORY
Notes on formatting *
•Supplied “Memory Stick”s have been formatted at factory. Formatting “Memory
Stick”s on your camcorder is not required.
•Do not do any of the following while FORMATTING is displayed:
– Switch the POWER switch
– Operate buttons
– Remove the “Memory Stick”
•You cannot format the “Memory Stick” if the write-protect tab on the “Memory Stick”
is set to LOCK.
•Format the “Memory Stick” when “ FORMAT ERROR” is displayed.
Formatting erases all information on the “Memory Stick” *
Check the contents of the “Memory Stick” before formatting.
• Formatting erases sample images on the “Memory Stick.”
• Formatting erases protected image data on the “Memory Stick.”
* Except DCR-TRV240
(continued on the following page)
Changing the menu settings