Filter
Top Products
27
Advanced operations
Using alkaline batteries
– CCD-TRV15/TRV25/TRV35/TRV65 only
Use the battery case (supplied) and six size AA (LR6) Sony Alkaline batteries (not
supplied).
(1) Remove the battery holder from the battery case.
(2) Insert six new alkaline batteries into the battery holder, following the marking
on the holder to be sure the batteries are installed in the correct direction.
(3) Insert the battery holder with the alkaline batteries.
(4) Insert the battery case with the alkaline batteries to the battery mounting
surface of the camcorder in the same way as the battery pack.
Using alternative power sources
12
3
Battery life
Using alkaline batteries at 77°F (25°C).
Upper numbers are the time when recording with the viewfinder. Lower numbers are
the time when recording with the LCD screen.
CCD- TRV15 TRV25/TRV35 TRV65
Continuous recording time
305 min. 285 min. 265 min.
210 min. 200 min. 190 min.
Typical recording time
160 min. 150 min. 140 min.
115 min. 110 min. 100 min.
PRECAUTION
When the battery case is installed with the camcorder, do not connect the AC power
adaptor to the camcorder.
Notes
•You may not use the battery case in cold environment.
•The battery life may be shorter depending on the using environment.
•The above battery lives are estimates. The battery life may be shorter depending on
the storage condition of the battery before being purchased and temperature.
To remove the battery case
The battery case is removed in the same way as the battery pack.
When you replace the batteries, be sure to remove the battery case from the camcorder
to prevent malfunction.
Remove the battery case after using it.