Filter
Top Products
108
Troubleshooting (Continued)
–[EXPOSURE]
– [SPOT METER]
– [SCENE SELECTION]
– [WHITE BAL.]
– [COLOR SLOW SHTR]
– [SUPER NIGHTSHOT]
– [BLT-IN ZOOM MIC]
– [MICREF LEVEL]
Even if you press EASY, menu
settings do not switch to their
defaults automatically.
• During Easy Handycam operation, settings
for the following menu items are
maintained the ones before Easy
Handycam operation.
– [MOVIE MEDIA SET]
– [PHOTO MEDIA SET]
*
– [AUDIO MODE]
– [WIDE SELECT]
– [X.V.COLOR]
– [SUB-T DATE]
– [FLASH MODE]
– [ INDEX SET]
– [CONVERSION LENS]
– [ IMAGE SIZE]
– [FILE NO.]
– [ DISPLAY]
– [VOLUME]
–[BEEP]
–[TV TYPE]
– [COMPONENT]
– [CLOCK SET]
– [AREA SET]
– [SUMMERTIME]
– [ LANGUAGE SET]
– [DEMO MODE]
– [CTRL FOR HDMI]
*HDR-UX19E/UX20E
Your camcorder vibrates.
• Vibration occurs depending on the
condition of the disc. This is not a
malfunction.
A vibration is felt in your hand or a
faint sound is heard during
operation.
• This is not a malfunction.
A motor sound is heard in the
camcorder when the disc cover is
closed without a disc.
• Your camcorder is trying to recognize the
disc. This is not a malfunction.
Your camcorder gets warm.
• This is because the power has been turned
on for a long time. This is not a
malfunction. Turn off your camcorder and
leave it for a while in a cool place.
The supplied Remote Commander
does not function.
• Set [REMOTE CTRL] to [ON] (p. 95).
• Insert a battery into the battery holder with
the +/– polarities correctly matching the +/
– marks (p. 140).
• Remove any obstructions between the
Remote Commander and the remote
sensor.
• Point the remote sensor away from strong
light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote
Commander may not function properly.
Another DVD device malfunctions
when you use the supplied Remote
Commander.
• Select a commander mode other than DVD
2 for your DVD device, or cover the sensor
of your DVD device with black paper.