Filter
Top Products
20
RS-232C Command List
Functions Available with
Memory Load/Save
Category Data Initial values
Gain AGC ON/OFF ON
AGC Max Gain 18dB
Step Gain 0dB
Shutter speed Shutter OFF/CCD Iris/ OFF
Variable
Shutter speed NTSC:1/60 PAL:1/50
CCD Iris Max Speed 1/4000
Exposure Exposure Compensation 80h : Normal Status
AE speed normal
White Balance WB mode AWB/ATW/ 3200K
manual/3200K/5600K
ATW speed normal
Manual R-gain 80h : Normal Status
Manual B-gain 80h : Normal Status
AWB R-gain
1)
–
AWB B-gain
1)
–
Video Process Pedestal 80h : Normal Status
Sharpness 80h : Normal Status
Gamma ON/OFF ON
Nega ON/OFF OFF
Output VBS/YC VBS
VS H-phase 80h : Normal Status
HD/VD H-phase 80h : Normal Status
1)
AWB R,B-gain retains the results of the last One
Push AWB operation. If “Memory Load” is carried
out when WB mode is set to AWB, the AWB R, B-
gain results held in memory are activated.
The Memory Bank to be
Activated When Power is Turned
on
When the RS-232C switches are set to
OFF
The “Factory” settings are activated. The AGC,
Shutter, WB, and VBS/YC settings made using the
DIP switches on the side of the camera or made using
R/B adjustment volume are given priority.
When the RS-232C switches are set to ON
The settings in the Memory Bank (Factory/A/B)
selected in the last Memory Load operation are
activated.
If started using “Factory,” immediately after the power
is turned on, the AGC, Shutter, W.Balance, and VBS/
YC settings made using the DIP switches on the side
of the camera or made using R/B adjustment volume
are given priority. After that, if the camera enters RS-
232C mode, and “Memory Load Factory” is carried
out, settings made using the DIP switches on the side
of the camera or made using R/B adjustment volume
are disabled, and the initial values shown in “Functions
Available with Memory Load/Save” on the previous
column are activated.