Sony XC-E Series Camcorder User Manual


  Open as PDF
of 4
 
XC-E Series Specifications
XC-ES50 XC-ES50L XC-ES51 XC-ES30 XC-EI50 XC-EI30 XC-EU50
Image device 1/2 type IT CCD 1/3 type IT CCD 1/2 type IT CCD 1/3 type IT CCD 1/2 type IT CCD
Effective picture elements 768 (H) x 494 (V)
Signal system EIA (standard)
Horizontal frequency 15.734 kHz
Vertical frequency 59.94 Hz
Cell size (µm) 8.4 x 9.8 6.35 x 7.4 8.4 x 9.8 6.35 x 7.4 8.4 x 9.8
Lens mount C mount
Flange back 17.526 mm
Sync system Internal/External (auto)
External sync system HD/VD (2 to 5 Vp-p)
External sync frequency ± 1 %
Jitter Less than ± 50 nsec
Scanning system 2:1 Interlaced
Video output 1.0 Vp-p, negative, 75 Ω unbalanced
Horizontal resolution 570 TV lines
Sensitivity
(Gamma ON, MIN GAIN, 400 lx F5.6 400 lx F4 400 lx F8 400 lx F4 400 lx F11 400 lx F8 –
No IR cut filter)
Minimum illumination* 0.3 lx 3.0 lx 0.2 lx 0.3 lx 0.1 lx 0.2 lx –
S/N ratio 60 dB
Gain AGC/Manual selectable
Gamma ON/OFF selectable
Normal shutter 1/100 to 1/10,000 s
External trigger shutter** 1/4 to 1/10,000 s
Power requirements DC 12 V (+9 to +16 V)
Power consumtion 1.6 W 1.4 W 1.6 W 1.4 W 1.6 W
Dimension (W) x (H) x (D) 29 x 29 x 30 mm 29 x 42.5 x 43.8 mm 29 x 29 x 30 mm
Mass 50 g (2 oz) 110 g (4 oz) 50 g (2 oz)
Operating temperature -5 to +45 °C (23 to 104 °F)
Operating humidity 20 to 80 %
Storage temperature -30 to +60 °C (-22 to +140 °F)
Storage humidity 20 to 95 %
Vibration resistance 10 G (20 to 200 Hz)
Shock resistance 70 G
MTBF 126,000 hrs.
Regulatory compliance UL1492, FCC Class B Digital Device, CE (EN61326/97 + A1/98), AS4251.1 + AS4252.2
Supplied accessories Lens mount cap (1), Operating instructions (1)
* (F1.4, AGC ON, without IR cut filter) ** Using Dip switch on the rear panel or Using trigger pulse width
XC-ES50CE XC-ES50LCE XC-ES51CE XC-ES30CE XC-EI50CE XC-EI30CE XC-EU50CE
Image device 1/2 type IT CCD 1/3 type IT CCD 1/2 type IT CCD 1/3 type IT CCD 1/2 type IT CCD
Effective picture elements 752 (H) x 582 (V)
Signal system CCIR (standard)
Horizontal frequency 15.625 kHz
Vertical frequency 50 Hz
Cell size (µm) 8.6 x 8.3 6.5 x 6.25 8.6 x 8.3 6.5 x 6.25 8.6 x 8.3
Lens mount C mount
Flange back 17.526 mm
Sync system Internal/External (auto)
External sync system HD/VD (2 to 5 Vp-p)
External sync frequency ± 1 %
Jitter Less than ± 50 nsec
Scanning system 2:1 Interlaced
Video output 1.0 Vp-p, negative, 75 Ω unbalanced
Horizontal resolution 560 TV lines
Sensitivity
(Gamma ON, MIN GAIN, 400 lx F5.6 400 lx F4 400 lx F8 400 lx F4 400 lx F11 400 lx F8 –
No IR cut filter)
Minimum illumination* 0.3 lx 3.0 lx 0.2 lx 0.3 lx 0.1 lx 0.2 lx –
S/N ratio 60 dB
Gain AGC/Manual selectable
Gamma ON/OFF selectable
Normal shutter 1/120 to 1/10,000 s
External trigger shutter** 1/4 to 1/8,000 s
Power requirements DC 12 V (+9 to +16 V)
Power consumtion 1.6 W 1.4 W 1.6 W 1.4 W 1.6 W
Dimension (W) x (H) x (D) 29 x 29 x 30 mm 29 x 42.5 x 43.8 mm 29 x 29 x 30 mm
Mass 50 g (2 oz) 110 g (4 oz) 50 g (2 oz)
Operating temperature -5 to +45 °C (23 to 104 °F)
Operating humidity 20 to 80 %
Storage temperature -30 to +60 °C (-22 to +140 °F)
Storage humidity 20 to 95 %
Vibration resistance 10 G (20 to 200 Hz)
Shock resistance 70 G
MTBF 126,000 hrs.
Regulatory compliance UL1492, FCC Class B Digital Device, CE (EN61326/97 + A1/98), AS4251.1 + AS4252.2
Supplied accessories Lens mount cap (1), Operating instructions (1)
* (F1.4, AGC ON, without IR cut filter) ** Using Dip switch on the rear panel or Using trigger pulse width
 previous