Filter
Top Products
24
1) When the SPECIAL menu screen is displayed, press the Function
Setup switch so that the arrow indicates 'PRIVACY'.
2) Set up the mode using the Function Setup switch.
- AREA : You can select up to 12 PRIVACY areas.
- MODE : Determines whether to use the area selected in the AREA.
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray.
- MASK TONE : Adjust the brightness of MASK COLOR.
- TOP/BOTTOM/LEFT/RIGHT :Adjust the size and position of the selected area.
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.
◆
DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
☞
NOTE
■
As the DIS function uses the digital zoom the camera's resolution will decrease.
■
DIS doesn’t operate when background illumination is too low.
■
DIS doesn’t operate when object pattern is monotonic as like sky or white wall.
●
PIR Sensor
●
Exit Setting
Built-In PIR sensor makes white LED "ON" when forces somebody's entry as a
warning system or function of the light.
It is set for 10 sec.
Select a desired EXIT mode using the Function Setup Switch.
- SAVE : Save the current settings and exit the MAIN SETUP menu.
- NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.
- RESET : Resets the camera settings to the factory defaults. Language,
Communication and Monitor Settings are not initialized.