NOTE
* In cases where the wrong Camera ID has been input........
Move the cursor to CLR and press SETUP button to erase characters from left to
right, and repeat the above steps to input the characters again.
1-5) To select the position where the Camera ID should be displayed on the screen.
①Move the cursor to POS and press the SET button.
CAMERA TITLE
0123456789
ABC DEFGH I J KLM
N OPQR STU VWXYZ
▷ → ← ↑ ↓ ( ) -
ㅡ _ □ / = & : ~ , .
← →
CLR POS E N D
②Created camera ID is displayed.
(Factory default position)
CAM1
28