25
1) When the SPECIAL menu screen is displayed, press the Function
Setup switch so that the arrow indicates 'PRIVACY'.
2) Set up the mode using the Function Setup switch.
- AREA : You can select up to 12 PRIVACY areas.
- MODE : Determines whether to use the area selected in the AREA.
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray.
- MASK TONE : Adjust the brightness of MASK COLOR.
- TOP/BOTTOM/LEFT/RIGHT :Adjust the size and position of the selected area.
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.
◆
DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
☞
NOTE
■
As the DIS function uses the digital zoom the camera's resolution will decrease.
■
DIS doesn’t operate when background illumination is too low.
■
DIS doesn’t operate when object pattern is monotonic as like sky or white wall.
●
PIR Sensor & Alarm with Motion Detection
Built-In PIR sensor turns the white LED ON when the PIR is triggered by motion.
○ White LED
switch 1 on → 10sec
switch 2 on → 20sec
switch 3 on → 30sec
switch 4 N/C
○ Alarm CAMERA Motion
switch 1 on → 10sec
switch 2 on → 20sec
switch 3 on → 30sec
switch 4 N/C
OFF ON