Filter
Top Products
CAMERA INSTALLATION
10
2. V-Phase Level (UP/Down)
When desired, the vertical phase may be adjusted to synchronize the
vertical phase of the camera with other cameras in the system.
This feature is only available in 24 Volt AC operation
3. Video Test Connector
Allows the connection of a Local Monitor to make initial adjustments
to the camera
4. Lux Level
Tells the camera when to switch to the B/W night mode.
: Only one switch can be in the
“
on
”
position at a time.
1
23
4
ON
OFF
#2 STEP - The camera will switch at 1 lux
#3 STEP - The camera will switch at 3 lux
#4 STEP - The camera will switch at 5 lux
#1 STEP - The camera will switch at 1/2 lux
5. Zoom Controller / Focus Controller
6. Heater
7. DC Lens Level
Fine tune the Auto IRIS Lens