Filter
Top Products
◈
FUNCTIONS
1. Setup for camera functions
ㆍ
Function setting combination
ㆍ
OSD MENU
①
SETUP :
To access the main menu.
Push this button for 1 second.
②
TELE / UP :
To zoom in on a far object.(ZOOM-IN) /
Moves the arrow indicator to up.
③
WIDE / DOWN :
To widen the view (ZOOM-OUT) /
Moves the arrow indicator to down.
④
NEAR / LEFT :
To focus on a near object clearly. /
Moves the arrow indicator to the left.
⑤
FAR / RIGHT :
To focus on a far object clearly. /
Moves the arrow indicator to the right.
⑥
EXT. VIDEO :
Plug your test monitor in here.
⑦
DAY & NIGHT :
- AUTO : DAY & NIGHT auto
- MANUAL : DAY & NIGHT passive
Color : Color fixed regardless illumination.
B/W : B/W fixed regardless illumination.(IR ON)
2. Camera function setting
MAIN SETUP
CAMERA TITLE
OFF
Set Camera Title String and OSD
Display Position.
ON
WHITE BAL
ATW -Mode:
OUTDOOR
INDOOR
ATW is controlled by color tem-
perature range
*MODE
- INDOOR : 3000~10,500°K
- OUTDOOR : level
AWC
→
SET
ONE PUSH
MANUAL RED / BLUE Adjustable.
BACKLIGHT
OFF / LOW /
MIDDLE /
HIGH
Backlight compensation.
MOTION
DETECTION
OFF Motion detection off
ON
AREA(4 Programmable zone/
SIZE)
The words "MOTION DETECTED"
appear on the screen when move-
ment is detected.
FOCUS Refer to focus setup
EXPOSURE Refer to exposure setup
SPECIAL Refer to special setup
RESET
Returns to the level which was
set by the manufacturer for ship-
ment.(except for communication
and Day & Night)
EXIT Saves all settings, then exits.
FOCUS SETUP TABLE
MODE
AUTO Focus is controlled automatically
MANUAL Focus is controlled manually
ONE-PUSH
Focus is automatically adjusted
just once, after zoom position is
changed.
ZOOM TRK
OFF Zoom tracking off
ON Zoom tracking on
ZOOM SPEED FAST/SLOW Zoom speed Control
D-ZOOM
OFF Digital zoom off
ON
Digital zoom limit selectable
(x2 ~ x10).
DIS ZOOM
MAG
OFF Zoom magnification display off
ON Zoom magnification display on.
ZOOM POS
INIT
OFF
When initialized, zoom position
is disabled.
ON
Zoom magnification set at power
on(x1 ~ x10)
LENS INIT Execute lens initialization.
EXPOSURE SETUP TABLE
BRIGHTNESS Brightness level adjustment.
IRIS
MANUAL IRIS is controlled manually.
AUTO IRIS is controlled automatically.
SHUTTER
MANUAL Shutter is controlled manually
A. FLK Anti-flicker
AGC
OFF Automatic gain control off.
NORMAL /
HIGH
Automatic gain control limit set.
SSNR
OFF Noise reduction off.
LOW /
MIDDLE /
HIGH
Noise reduction level set.
SENS-UP
OFF Sense-up off
AUTO
Sense-up limit selectable
(x2 ~ x128)
SPECIAL SETUP TABLE
USER PRESET
OFF Turns function off
ON
Using the position preset function,
8 sets of camera shooting condi-
tions can be stored and recalled.
PRIVACY
OFF Privacy mask off
ON
AREA(4 Programmable zone)
/ SIZE / TONE adjustable.
SYNC
INT Internal Sync.
LL
External Sync(can adjust desired
phase from 0° ~ 359°).
Trigger Signal: Auto Detection.
COMM ADJ Refer to communication setup
IMAGE ADJ Refer to communication setup
COMMUNICATION SETUP TABLE
CAM ID
OFF ID not displayed
ON Camera names are displayed
DISP CAM ID
OFF Communication ID display off.
ON Communication ID display on.
BAUD RATE 2400 ~ 57600
Baud-rate set
(factory default : 2400).
UART MODE
8-E-1 / 8-0-1 /
8-N-1
Parity bits selectable.
(factory default : 8-N-1)
RET PKT
DISABLE
Do not send a command back
to the control & device.
ENABLE
Returning the data when com-
munication.
(Caution : Activate this function
to use D&N.)
* Protocol: Pelco-D
IMAGE SETUP TABLE
FREEZE
OFF Freeze image: OFF
ON Freeze image: ON
H-REV
OFF Horizontal reverse: OFF
ON Horizontal reverse: ON
V-REV
OFF Vertical reverse: OFF
ON Vertical reverse: ON
SHARPNESS
OFF Sharpness control is disabled.
ON The Sharpness can be adjusted.
COLOR GAIN
The Color level can be adjusted
(0~100)
◈
DIMENSIONS
◈
SPECIFICATION
Model HTB10X
Type
Weatherproof x10 optical motorized zoom
color camera
Image Sensor 1/4" SONY SUPER HAD CCD
Effective Pixel 768(H) X 494(V)
TV Type NTSC
Scanning System 2:1 Interlace
Sync. System Internal / Line lock
Scan. Freq.(HOR.)
INT : 15.734KHz
L/L : 15.750KHz
Scan. Freq.(VERT.)
INT : 59.94Hz
L/L : 60.00Hz
Resolution
580 lines resolution(IR ON)
560 lines resolution(IR OFF)
Video Output
1.0 Vp-p(Sync. Negative)
with 75
Ω
Termination
S/N Ratio More than 50dB(weight ON)
Min. Illumination
0.05 Lux (F1.8) : LED OFF
0 Lux (40M range) : LED ON
Gamma r = 0.45
Shutter Speed
Auto(x128 ~ 1/60 ~ 1/120,000sec)
Sense-up and Sense-up limit is selectable,
Flickerless
White Balance ATW / AWC / Manual(1,800 ~ 10,500
°
K)
SSNR LOW / MIDDLE / HIGH / OFF
Motion Detection ON / OFF(4 programmable zone per screen)
Privacy Function
ON / OFF(32 zones, It consists of 8 group
4 programmable, zone per screen)
Flip Vertical, Horizontal, Vertical-Horizontal, OFF
Preset 8 position
OSD Yes
ZOOM
Optical zoom 10X,
Digital zoom 10X
FOCAL Length
f = 3.8(W) ~ 38.0(T)
F 1.8(W) ~ F 2.8(T)
Angle of View
51.2
°
(Wide End), 5.58
°
(Tele End)
Min. Working
Distance
0.1M
Communication RS-485
Power Supply 24 Volts AC, 12 Volts DC - Dual Voltage
Current Consumption
Max. 600mA
Operation Temp.
-20
°
F to 140
°
F
Dimension 3.1”W x 3”H x 6.8”L
Weight 3.3 Ibs.
※
The specification is subject to change without any prior
notice to improve the quality. Rev. 1/25/10.
HTB10X