Model VL-10 VL-11
Pick Up Device 1/3” Interline transfer CCD
Resolution 420TV Lines
Lens 4.3mm
Total Pixels
NTSC:537(H) x 505(V)
PAL:537(H) x 597(V)
Sync system 2:1 Internal Internal
Scanning system
525 line / 60 frames
Video Output Composite 1.0 Vp-p / 75 ohms
Minimum Illumination 0.5 lux color / 0 lux with IR on
IR Radiant Distance 65 feet 50 feet
S/N Ratio 50dB or more
Electronic Shutter Auto 1/60sec. to 1/100,000dec.
Horizontal Frequency 15.734KHz
Vertical Frequency 59.94Hz 60Hz
Backlight Compensation Built-in (Option
Jumper ON / OFF )
ON / OFF
switchable
Power Supply Regulated 12V DC power supply
required-model PSW-5
Consumption Current Max. 300mA Max. 280mA
Weight 0.46kg convert to
lbs.
0.505kg / 0.56kg
convert to lbs.
Dimensions 2.7” dia x 3.7” H 2.25” dia x 3.25” H
Operating Temp -14 to 122℉
Wall / Ceiling Mount
Included
Included
Housing Silver / Aluminum
7
SPECIFICATIONS
INSTALLATION
1. Attach bracket to wall or ceiling.
2. Attach camera to bracket.
3. Aim camera and tighten mounting.
4. Attach a 75 ohm coaxial cable (95% copper shield recommended) to
the BNC output.
5. Apply regulated 12 Volts DC to the power connector.
6
Mount:
Rotate the camera angle as required tighten thumbscrew.
Sunshade:
Adjust as necessary to prevent the sun from hitting the camera
lens, make sure that the sunshade is not in the camera’s field of
view.
Power and video connections:
Power: Regulated 12 Volts DC, center pin is positive (+)
Video: BNC, 1 Volt p-p
5
Scaffold
Sunshade
DC Power
BNC Video Output
8
DIMENSIONS
VL-10
VL-11