Filter
Top Products
INSTALLATION Cont’d...
RECEIVER
1. Insert the AV Adapter Plug into the AV Output port of the receiver
2. Insert the yellow and white cable plugs into the Video Input and
Audio Input Jacks of your TV.
3. Connect the AC Power Adapter to the 9V Power Input Jack
of the receiver.
4. Select the desire channel (1-4). Make sure it matches the transmission
channel of the Teddy Cam.
5. Plug the AC Power Adaptor into a standard 120V/230V AC electrical
outlet.
6. Slide the ON/OFF Switch to the ON position.
7. Television Set configuration:
•Turn on the power to the television set.
•Switch the TV channel to the VIDEO/LINE INPUT position.
•Adjust the TV volume and pictures, as desired.
•TV/Video can be switched each other to monitor surroundings
while TV / DVD program is being played.
8. Unplug the AC Power Adaptor from the electrical outlet when it is not
in use or is left unattended.
VIDEO RECORDING SETUP
1. Follow the normal setup procedures for the Bear Video Camera and
Receiver.
2. Insert the yellow & white cable plugs into the Video Input and Audio
Input Jacks of your VCR/DVR.
3. Make sure your VCR is connected to your television set.
www.svat.com
Bear Video Camera
3.5 Plug
AV Cable
Receiver
Audio Video
Input Input
TV
White Plug
Yellow Plug
Bear Video Camera
3.5 Plug
AV Cable
Receiver
Audio Video
Input Input
White Plug
Yellow Plug
TV
A/V Source