Filter
Top Products
Installation Procedures (see diagram below)
1. Connect the antenna to the receiver
2. Plug the DC 12V power adapter to the receiver. This will activate
the unit and the power indicator LED will turn on.
3. Connect the audio/video cables to the receiver audio and video
out terminals. Note that the terminals are colour coded to match
the cables. Plug the other ends of the Audio/Video cables into your
TV or VCR.
4. Match the channel of the receiver to the channel of the camera.
This channel will be indicated by a sticker on the camera.
5. Plug the DC 8V power adapter into the power socket of the
camera (you may use the battery adapter as well).
6. Turn the viewing station on your television or VCR to the input
channel and now you can see.
7. When you are using more than one camera activate the auto
switching by turning on a channel on the receiver. To do this match
the number of the extra camera and turn that switch down to the
on position.
www.svat.com
Audio out
Video out
Wireless Receiver
DC power 5V/8V
DC power 9V/12V
Camera Antenna
Power Jack
Monitor
Battery adapter
Receiver Antenna