Swann Imitation Security Device Security Camera User Manual


  Open as PDF
of 2
 
The Imitation Security Camera is an affordable and effective theft-deterrent device. With its
realistic camera casing and camera cable, it looks like a real surveillance camera. You can easily
mount the imitation security camera indoors or outdoors to deter possible thieves and
intruders.
Your imitation security camera comes with a wall mounting plate, camera cable, camera stand (
connected to the wall mounting plate), three 1-inch (25.4mm) screws, and the three drywall
anchors.
Suggestion: An economical way to catch thieves in the act is to mix Swann Imitation cameras
with identical (real) Swann D-cams (product code: SW-P-DCAM).
Installation Instructions
2
1. Using the wall mounting plate as a template, use a pencil to mark the position of the
three screw holes on the mounting location.
2. Drill three 1-inch (25.4mm) holes in the marked positions.
3. If necessary, insert the three supplied drywall anchors into the screw holes.
4. Insert a 1-inch (25.4mm) screw through each of the three screw holes in the wall
mounting plate and into the mounting surface, then tighten the screws.
5. Insert the bolt at the top of the camera stand into the nut in the bottom of the imitation
security camera, then use a pair of pliers to firmly tighten it.
6. Turn the camera stand’s knob to tighten the swivel on the camera stand.
7. Connect the camera cable’s F connector to the plug on the back of the imitation security
camera.
Camera Cable
Drywall Anchor
Knob
Camera Stand
1-Inch (25.4mm) Screws
Wall Mounting Plate
Mounting the camera on your wall or ceiling
Mounting the camera on your wall or ceiling (continued)
3
CARE
Keep the Imitation security camera dry; if it gets wet, wipe it dry immediately. Use and store
the imitation security camera only in normal temperature environments. Handle the imitation
security camera carefully; do not drop it. Keep the imitation security camera away from dust
and dirt, and wipe it with a damp cloth occasionally to keep it looking new.
Dimensions:
Camera (HWD): 1 15/16 x 1 13/16 x 5 Inches
(50 x 46x127mm)
Wall Mounting Plate and Camera Stand (HD): 5½x23/8Inches
(140 x 60mm)
Weight (mounted): 9.2 oz (260 g)
Using the Imitation Security Camera
Specifications
 previous